Skip to main content
Water & Effluent Treatment

Fluoride Removal from Drinking Water

Reducing fluoride in drinking water to WHO limits using activated-alumina adsorption — for municipal and community water supply in affected regions.

Quick Answer

Fluoride removal by adsorption passes drinking water through a bed of activated alumina, which adsorbs fluoride ions and reduces concentration to the WHO guideline of 1.5 mg/L. The media is periodically regenerated or replaced, providing a simple, robust solution for affected municipal and community supplies.

Natural geological fluoride above 1.5 mg/L causes dental and skeletal fluorosis. Affected communities need a reliable, low-complexity treatment that can run with minimal operator skill and infrastructure.

How It Works

Raw water flows through a fixed bed of activated alumina, which adsorbs fluoride preferentially. When the bed approaches breakthrough it is regenerated with dilute caustic and acid, or replaced — restoring capacity.

Deployment

Suitable for municipal plants and decentralised community units. Low energy, no membranes, and simple operation make it well suited to remote and resource-limited settings.

FAQ

How often is the media replaced?

It depends on raw fluoride level, flow, and target. We design a monitoring and regeneration/replacement schedule so outlet fluoride stays within limit.

Selection Guidance

Use NSF-eligible defluoridation-grade activated alumina. Size the bed for the raw fluoride level, flow, and target, and plan a regeneration or media-replacement schedule based on breakthrough monitoring.

Specify a Solution for This Application

Provide your process conditions — our team will recommend grade, configuration, and sizing.

WhatsApp Call